EzyAnchor Outback Pack - AN-0006

The Outback Pack has been put together for those who spend the majority of their time traveling within Australia and away from the Coastal soils, it is designed for areas such as The Far Outback and Centre of Australia. Designed for hard red dirt, gravelly surfaces, and hard-packed clay found in these areas.

Package Includes

• 6 x Ezy Anchors
• 6 x 200mm Long Screws
• 1 x Torx T50 Driver
• 1 x Calico Storage Bag

EzyAnchor Outback packs have been put together by months of testing in both types of the areas detailed above and also research throughout Central and Outback Australia.

Installation is super easy

1. Take your cordless drill or impact driver
2. Connect the supplied Torx driver bit to the drill/driver and secure it in the chuck
3. Pick up your Ezy Anchor with screw-in position through the Ezy Anchor hole
4. Connect your guy rope to the hook of Ezy Anchor
5. Hold the guy rope and hook together with your guiding hand
6. Pick up the drill and driver in your driving hand
7. Insert the Torx driver into the head of the screw until fully seated in the screw head.
8. Place drill in forward drilling position
9. Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
10. Installation complete, how simple is that!

If you do happen to hit a solid object whilst installing the screw, simply remove and reposition the screw to another position close to or adjacent to the original required position.

Removal is just as easy

1. With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head, making sure torx bit is fully seated in the screw head
2. Hold the hook and guy rope in one hand, place drill in reverse, and screw out.
3. Removal complete.

*We've all been in this situation before where your drill battery goes flat, if you get a flat battery you can connect a shifting spanner to the Torx driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.*